Paras Telecom

Rs. 100/- buy back on any old phone on purchase of new phone.

Gateway 2000 Tip

GATEWAY-2000 TIP is a Time and Attendance System with a Authentication Device , specifically designed to provide irrefutable personal verification . It is a standard , wall - mounted and self contained device with a Finger Print Scanner to enroll and verify users, store their Finger Records , keep transaction logs, and interface with computers. A RFID based Proximity Reader and a Keypad for PIN Input is included for added security. GATEWAY-2000 TIP provides enhanced security , superior speed and most importantly eliminates Buddy/Proxy Punching . Only authorized personnel are allowed access to the protected area or to Clock IN/OUT.

GATEWAY-2000 TIP is a Proximity & PIN based Time and Attendance System with Biometric Authentication.With a Built-In 50 mm sensing Proximity Reader, FingerPrint Module and KeyPad , it gives the operator a choice of access modes in any combination of Card, Fingerprint and PIN entries. All the exacting demands of the Time Office are packed into this product which has a microcontroller based as its heart , having the capacity to cater to large organisations and high security premises.

Initially the users have to Enroll their Fingerprints. 2 fingers of each user can be enrolled and a maximum of 2000 such users can be stored in GATEWAY-2000 TIP. With a casual SHOW of the ID Card or by entry of PIN followed by verification through Fingerprint Scan Employee IN & OUT times are stored as Soft Data which are then uploaded to a PC for Time Office related reports and Payroll Generation thus automating the Time Office. This reduces the manual drudgery of Data Entry, Register maintenance and monthly requirement of Punch Cards for conventional Time Clocks to a minimum.

General System Features
	16 char x 4 line backlit LCD display
	SMPS power supply with maintenance free battery (backup upto 24 hours)
	RS232/RS485 interface for PC connectivity
	Transaction Storage - 10000 Records
	COMPRO Data Upload Software

Validation Table ensures that Accredited people are only allowed Attendance. A Table of upto 2000 ID’s can be programmed at will.

Time Masking facilitates acceptance of the attendance only during particular time slots to filter out persons who are late comers or early goers.

Employee Masking feature may be used to reject certain ID codes, ensuring it does not store those Cards on swiping.

Reason Master is meant for assigning a reason for person who uses the Reason Master Card along with his card. It can flexibly be used for Reasons such as “Exit for Official Work” or even “Choice of meals at Canteen” etc. Upto 8 Reason Codes can be assigned.

Paging Service flashes a message downloaded from the computer on the LCD display against a ID Code or even against all ID codes (Bulletin Board).

Siren Interface is for signalling Start and End of "Shifts" automatically upon "Shift Times" programming. Siren can be programmed for activation upto 16 times a day . A weekly schedule can be created for the siren. Relay ON time for siren can be predefined.

Access Control feature may be used to interface Electro-Mechanical Turn Stile or Electromagnetic Locks for Controlled Access.

Tcp/Ip Connectivity An optional feature which allows the GATEWAY-2000 SMART to be a drop on your Plantwide Ethernet Network.

Uninterrupted Power Power is the most varied & uncertain aspect in the Industry and to maintain secure & uninterrupted operation, a Switched Mode Power Supply is used to handle wide Voltage & Frequency variation.
The transaction Data are backed by Lithium Battery in order to keep the data intact even without power (for upto 10 years).
In case of power failure, the in-built maintenance free Battery provides the power for operation of the terminal for upto 24 hours.

Distributed Load Sharing

This is necessitated because of high Influx of users during certain times, Multiple points of entry, Separate IN and OUT bays etc. To take care of these, multiple terminals are to be installed. Each terminal can typically take care of approximately 200 persons at peak hours.
The following connection topology may be used.
All the Gateway-2000’s connected on RS-485 Data Highway gets terminated to the RS232C (COM Port) of Master Computer through a RS485 to RS232 Converter (COMCON). This Data Highway Bus works on twisted pair shielded cable in Multidrop Topology ensuring minimum cabling.
Depending on the geography of a place, it may be required to have multiple RS485 Networks having multiple Gateway-2000 connected to the Master Computer (Star Network). A standard Windows compatible Multi Port Serial Card is needed in the computer in this topology.
The Gateway-2000’s can be connected on the Plantwide Ethernet Backbone using a Ethernet (UTP) to RS485 Converter (COMCON TCP/IP). Protocol supported is TCP/IP with support for Gateway's & WAN.
Any PC Node on the Ethernet network can download the transaction data from the Gateway-2000 terminals which are connected to the Serial Port of a PC on the same network.
In case of a Remote Installation, the transaction data can be downloaded through MODEM using telephone / leased line.

Technical Information
	CPU : 89C51 @ 24 MHz
	Memory : 128 KB RAM (10000 Records Storage)
	Card Reader : 125 KHz RFID based Prox Reader distance upto 30 mm
	FINGER PRINT READER :
	- User Data : 2000 users X 2 Fingers.
	- Matching Speed : Less Than 1 Second.
	- FAR : 1/100,000 ~ 1/1,000,000
	- FRR : 1/100 ~ 1/30
	- Allowable Finger Rotation : +/- 35 Degrees
	- Allowable Finger Displacement : +/- 5mm
	Watch Dog Timer : Yes
	KeyPad : 12 Key tactile membrane keypad for PIN entry.
	Battery Back-up : Retention of Clock & Data Up to 10 years in absence of Power
	Communication : RS232C or RS485 (Isolated with Surge Protection)
	Data Upload Speed : 1000 Records/ minute
	Display : 16 characters x 4 Line Wide Angle Backlit Alphanumeric LC
	Power : Switch Mode Power Supply : 170V to 260V @50 HZ +/- 5HZ
	Uninterrupted Power : Using 7 AH Maintenance Free Battery for 24 Hours Backup
	Relay O/P : 2 Potential Free Contact O/P
	Dimension : 140(H) X 210(W) X 45(D) mm (Reader)
	175(H) X 305(W) X 75(D) mm (Power Supply with Battery)
	Mounting : Wall / Panel Mounting
	Casing : Dust Resistant Corrosion Free Metal Enclosure
	Operating Temperature : 0-50 Deg C
	Modularity : 2 Box Design

Ordering Information
	GATEWAY-2000 TIP : Time and Attendance Terminal with PROX+FINGER+PIN READER.
	COMCON : RS232C to RS485 Converter
	COMCON TCP/IP : RS232C/485 to Ethernet Converter
	COM_PRO 2000 : Communication & Configuration Software
	COMREP : RS485 Repeater
	MIS TIME PRO : Time Office Report Generation Software
	ACCESSORIES :
	- 125 KHz RFID based PROXIMITY CARDS
	- 2 CORE TWISTED PAIR SHIELDED CABLE.
	- 3 CORE RS232 CABLE

Fingerprint Reader Technology

DSP chip based, 80 MHz 32 Bit RISC CPU low memory, low FAR and low FRR, low Template Size(120 bytes) , MINUTIAE only Technology, verification (one to one) and Identification (one to many) provided. Any one of the ten fingers can be enrolled . A person may enroll two alternate fingers under the same PIN number.

Application Areas
	Computer Software Companies.
	Call centers.
	Factories.
	Defense Labs
	R & D setups
	High Security Premises

<< Gateway 2000

Home

Micro Ben Office >>